Gamma Benzene Hexachloride Liquid

Gamma Benzene Hexachloride Liquid

PURPOSE:  This Master formula record (MFR) is written to describe the formulae, manufacturing procedure, specifications, packing details of dosage form.

SCOPE: This MFR is performed and is applied during the manufacturing of dosage form.

RESPONSIBILITY / ACCOUNTABILITY: It is the responsibility of  Manufacturing Chemist to follow and adhere to this SOP. The Production Pharmacist, QC/QA Manager are accountable for the strict adherence to the master formula.

COPY ISSUED TO:

Master Copy : Manager Quality Assurance

Copy No. 1 : Production Pharmacist

Copy No. 2 : Manager Quality Control

Copy No. 3 : External Preparation Section

PRODUCT NAME: Gamma Benzene Hexachloride LiquidBATCH SIZE:  4000 LTRS.
PRODUCT REFERENCE CODE:UNIT SIZE:  100ml
GENERIC NAME: GAMMA BENZENE HEXACHLORIDE LOTION I.P.PACK SIZE:  12 x 8 x 100 ML
DOSAGE FORM: SEMI LIQUIDSTRENGTH: N.A.
DEPARTMENT:  EXTERNAL PREPARATIONEXPIRY DATE: AFTER 24 MONTHS FROM THE DATE OF MANUFACTURING

 COMPOSITION:

 Gamma Benzene Hexachloride   U.S.P.     1% w/v

EQUIPMENTS TO BE USED:

SR. NO.NAME OF EQUIPMENTASSEMBLING

AS PER SOP NO.

CLEANING

AS PER SOP NO.

1Charging Tank (1200 Lts)
2Storage Tank – 5000 Ltrs
3Manual Bottle Filling Machine
4Semi Automatic Bottle Sealing Machine
5Semi Automatic Bottle Labelling Machine

 

RAW MATERIALS:

S.NO.INGREDIENTS STDTheoretical Quantity Req.Overages %Total Quantity Used
1CETOCETYL ALCOHOLI.P.144.000144.000 KGS
2LAVENDER OILF.G20.00020.000 LTR
3LINDANE (GAMMA BENZENE HEXACHLORIDE)U.S.P40.00040.00 KGS
4LIQUI D PARAFFIN LIGHTI.P.200.000200.000 KGS
5S.L.S.I.P.16.00016.000 KGS

PACKING MATERIALS:

S.NO.NAME OF THE MATERIAL THEORETICAL QUANTITY REQ.FOR

RECORD

TOTAL QUANTITY USED
1.100 ML PLASTIC FLAT BTLS10000.00010000.000 NOS
26 X 20 MM FLIP TOP PL. CAPS10000.00010000.000 NOS
3ADHESIVE TAPE ROLL BROWN3.0003.000 NOS
4CELLO TAPE10000.00010000.000 NOS
5CORRUGATED BOX  S -18104.000104.000 NOS
6OUTER837.0002.000839.000 NOS
7LABEL FRONT10104.0003.00010107.000 NOS
8LABEL BACK10104.0003.00010108.000 NOS

MANUFACTURING SPECIFICATION:

Average fill of each Bottle is 100 ml.

Volume variation limit allowed in each filled Bottle is 100 ml to 102 ml.

Make up the final volume accurately.

Transfer the batch from charging tank  to storage tank  after complete charging of batch.Prepare the batch in 4 lots of same size i.e. 4 ´ 1000 Ltrs.

Prepare second, third and fourth lot only after the completion of first batch.

Prepare the rest of the lots in the same manner repeating the procedure of lot one and send the sample for bulk testing.

Yield:

Theoretical Yield is 40000 Bottles.

Expected Practical Yield is 40000 + 2% Bottles.

Packing Details:

Wash the bottles manually.

Transfer the lotion from charging tank to Manual Bottle Filling and Sealing Machine for filling of the bottles as per its SOP.

Fill 100 ml of lotion in white plastic flat bottle.

Label every filled and closed bottle, from both front and backside, manually.

Pack each filled and labelled bottle in unit carton individually.

Make a group of 12 bottles packed in one outer carton.

Pack such 8 outer boxes in the Corrugated box  Thus each corrugated box contains 8 x 12 x 100 filled and sealed bottles.

Seal each corrugated box with adhesive tape and label it properly by affixing the specified label.

MANUFACTURING PROCESS:

Add 880 kgs of purified water in the steam jacketed charging tank and slowly heat at 700 C  by running the steam in the jacket of the tank. Start stirring in the tank.

Now add 36.0 kgs of Cetocetyl Alcohol in charging tank  and heat it to 700 C and add 4.0 kgs of S.L.S. to it. Mix properly by allowing stirring and transfer this Emulsifying Wax to charging tank under constant stirring.

Heat 50.0 kgs of Liquid Paraffin to 650C in Stainless Steel Container and dissolve 10.0 kgs of Lindane to it. Stir it to dissolve completely and transfer to charging tank  under constant stirring.

Stop the stirring and cool the whole batch to room temperature.

Add 5.0 kgs of Lavender oil to the same batch.

Transfer this to the Storage tank.

 IN-PROCESS CONTROLS:

The following in-process controls should be maintained during the processing:

Check Raw materials used for manufacturing purpose are all approved and have ‘Released’ labels fixed on it.

All weighed Raw materials should be counter-checked by  Manufacturing Chemist. If any discrepancy is noticed, it should be immediately brought to the notice of Production Pharmacist and QC/QA Manager.

Physical characteristics of Raw material like colour, odour, and consistency are checked before compounding.

Final volume should be made as per MFR  using correct dipstick in the  Manufacturing Chemist.

pH of the bulk should be checked and it should be with in specified limits.

Bulk sample should be sent for analysis to Quality Control Department before starting the filling and sealing stage.

The Manufacturing Chemist should check intermittently filled volume at 30 minutes interval and record for the same should be kept in Batch Manufacturing Record.

The net volume should be checked for all the filling nozzles and in no case, net volume should be less than volume claimed on the label.

Limit for Volume Variation:  Volume claimed on the label + 2ml

Visual inspection of filled and sealed bottles should be done as per SOP and the record of the same should be kept in the Batch Manufacturing Record.

Suspensions should be filled under constant slow speed stirring to maintain uniformity of contents.

The labels and cartons should be checked thoroughly for proper batch coding.

Intimation should be sent to Quality Control Department for finished product sampling and testing.

After the completion of labelling and packaging, the coded labels and cartons should be accounted for and rejected printed material should be destroyed in the presence of QC/QA Manager. Maintain the destruction of the same in the Batch Manufacturing Record.

It will be ensure that filling or packaging equipment has been properly cleaned.

Filling or packaging of next product should not commence until the Quality Control Analyst has given the ‘Line Clearance’.

OTHER RELATED POST: Boric Acid and Zinc Oxide Ointment